Manual Electric Press MEP

Pressfit Models

Overview


SYNEO offers a tiered range of servo electric presses designed to insert compliant pin connectors into printed circuit boards. Each SYNEO press is programmed and operated via a dedicated PC, that can be directly programmed or can also utilize a remote programming workstation that supports multi-machine configurations.

SYNEO’s high-resolution press position feedback (0.001mm true Z-Axis resolution) closely monitors pressing force (even below 1lb) in real time, allowing an operator to be immediately aware of a problem such as a bent pin, an oversized PCB hole, or an incorrectly positioned connector during the press cycle. Instantaneous feedback for board problems improves resolution in quality assurance, improving yield metrics while reducing operating costs.

All press programs, connectors, board layouts, press profiles, and tool part numbers can be stored, so future applications can be easily adapted from existing programs and transferred between machines in multi-machine arrangements. All these functions improve the versatility of the work cell and help prevent future careless errors by allowing users to utilize previously validated information.


MEP-5tb Tabletop
Press

MEP 5TB Manual Electric Press Fit Machine by SYNEO

Specifications


  • Opening 56 CM x 61 CM deep (22" x 24")
  • PCB 46 CM x 61 CM (18" x 24")
  • All electric press, hi-frame design
  • 5-ton capacity
  • Windows PC control with touchscreen monitor, keyboard, mouse
  • Full force available throughout travel
  • Head is manually moveable throughout opening
  • Flat rock press head 203 MM x 38 MM (8" x 1.5")
  • Teflon Hard Coat aluminum table
  • Two-hand safety actuation
  • Press to force or height with error detection
  • Dynamic force adjustment using PAST, PAR or FAT
  • Machine Vision bar code reading and PCB locating
  • Fully automatic setup
  • Board thickness measurement
  • 16" maximum tool length
  • Press to force or height with error detection
  • Manual head rotation (0, 90 degrees)
  • 110 or 220 VAC 1 phase, 15 Amps, 50/60 Hz
  • Air 80 psi for air table only
  • 350 lbs. approx. weight
  • Shipping: 1 pallet, 152 CM x 122 CM x 140 CM high, 500 lbs

MEP-8TM Manual Electric
Press

Manual Electric Press Fit Machine MEP 8TM by SYNEO

Specifications


  • Opening 91 CM x 91 CM deep (30" x 36")
  • PCB 64 CM x 91 CM (24" x 36")
  • Servo Electric 'H'-frame design
  • 8-ton capacity
  • Windows PC control with touchscreen monitor, keyboard, mouse
  • Full force available throughout travel
  • Head is manually moveable throughout opening
  • Flat rock press head 254 MM x 38 MM (10" x 1.5")
  • Teflon Hard Coat aluminum table
  • Two-hand safety actuation
  • Press to force or height with error detection
  • Dynamic force adjustment using PAST, PAR or FAT
  • Fully automatic setup, no manual adjustments
  • Board thickness measurement220 VAC 1 phase, 20 Amps, 50 /60 Hz
  • Air 80 psi for air table & sliding head air bearing
  • 1,500 lbs. approx. weight
  • Shipping: 1 pallet, 190 CM x 170 CM x 196 CM high, 1900

MEP-8TL Manual Electric
Press

SYNEO MEP 8TL Manual Electric Press Fit Machine

Specifications


  • Opening 91 CM x 91 CM deep (36" x 36")
  • PCB 76 CM x 91 CM (30" x 36")
  • All electric press, hi-frame design
  • 8-ton capacity
  • Windows PC control with touchscreen monitor, keyboard, mouse
  • Full force available throughout travel
  • Head is manually moveable throughout opening
  • Flat rock press head 305 MM x 38 MM (12" x 1.5")
  • Teflon Hard Coat aluminum table
  • Two-hand safety actuation
  • Press to force or height with error detection
  • Dynamic force adjustment using PAST, PAR or FAT
  • Fully automatic setup, no manual adjustments
  • Board thickness measurement
  • 220 VAC 1 phase, 20 Amps, 50/60 Hz
  • Air 80 psi for air table & sliding head air bearing
  • 2,300 lbs. approx. weight
  • Shipping : 1 pallet, 190 CM x 170 CM x 196 CM high, 1900 lbs
SYNEO MEP 5tb Manual Electric Press Fit Machine SYNEO MEP 8tm Manual Electric Press Fit Machine SYNEO MEP 8tl Manual Electric Press Fit Machine
Machine Model MEP-5TB MEP-8TM MEP-8TL
Press Force 5 Tons 8 Tons 8 Tons
Two Stage Force(2SF) OPTIONAL YES YES
True Distnace Mesurment(TDM) OPTIONAL YES YES
Board Size 580mm x 800mm 680mm x 910mm 830mm x 1060mm
Press Anvil Size 279mm x 38mm 279mm x 38mm 279mm x 38mm
Dimensions 870 x 830 x 1120mm 965 x 915 x 1780mm 1095 x 1095 x 1855mm

All MEP models include


  • User-friendly HMI
  • Password Access Control
  • Barcode Board Selecting
  • Multi-Language
  • Ethernet Control System
  • 16-Bit Force A/D
  • Min & Max Force Per Pin Monitor
  • Force Termination (FT)
  • Height Termination (HT)
  • Force Angle Termination (FAT)
  • PAST % Above Sample Termination
  • Light Curtain
  • Tool-In-Place Sensor
  • Air Table with Foot Switch